Established in 1998, China Guanda Hose Technology Co., Ltd. is a professional pitot tube manufacturer and wholesaler of hoses and tubes. Our annually capacity of various kinds of hoses is more than 5,000,000 meters. Our customized pitot tubes products are applied in industrial equipment, hotels, villas, toilets, and kitchens. They are widely used in the field of aerospace, metallurgy, petrol-chemical, machinery, architecture, shipping, vacuum, power and light industries.

Seadog Line Speedometer Pitot Tube 4 7/16?. This Seadog Line tube features injection molded nylon. Universal design works with most speedo's. Installation kit includes: pitot, pitot tube shield, clamps and mounting screws. Lengt Sold as Each. The Gretz Aero GA-1000 is a totally new design of heated pitot tube. It is molded from a very high-tech polymer material that has nearly the same thermal conductivity as that of metal. This new design has electronics embedded in the Pitot tube. It also comes with a small electronic control module to control the heat of the Pitot as well as to provide information to the pilot regarding thermal and heater performance of the Pitot tube. This done by way of a 3/16 inch diameter multi-conductor cable that has a LED board already attached that will mount conveniently on the panel.Threaded outlet fits 1/4" size AN tube fittings. Use 2.023 x .857 x .049 4130 Streamline Tubing to fabricate mount.

Cleverly offset universal mounting hole pattern will allow replacing of Medallion, OMC, Mercury, and Faria Pitot tubes while using the existing screw holes. No need to drill new holes. Weedless design. Will kick up on impact. These heated pitot tubes are similar to AN5812 pitot tubes but are 1/4" deeper and 1/2" longer. Available in 12 volt or 24 volt models and furnished 8130 release note. Not FAA approved for certificated aircraft. The Pitot tube has a very modern and sleek shape that is pleasing to the eye. It is very dark grey to black in color and can be painted if desired. The GA-1000 will fit the Gretz mounting bracket kits that were designed for other popular Pitot tubes. The GA-1000 Pitot tubes come with the electronic control module, the LED board and cable, Pitot mounting screws, electronic control module mounting hardware, and of course, complete instructions for installation and use. This heated pitot tube mounts under the wing. Used on Mooney, Beech, Piper, Maule, American Aviation aircraft, Glasair and Glastar.