Established in 1998, China Guanda Hose Technology Co., Ltd. is a professional hose clamp manufacturer and wholesaler of hoses and tubes. Our annually capacity of various kinds of hoses is more than 5,000,000 meters. Our customized hose clamps products are applied in industrial equipment, hotels, villas, toilets, and kitchens. They are widely used in the field of aerospace, metallurgy, petrol-chemical, machinery, architecture, shipping, vacuum, power and light industries.

4-inch diameter
sold as each
These 4-inch diameter steel-band hose clamps are used to connect piping to dust hoods, blast gates, and fittings. sold as each. Pack of 34 worm gear hose clamps in eight popular sizes, 1 1/16in. through 2 3/4in.. You get four 1 1/16in. size, six each of 1 1/4in., 1 1/2in. and 1 3/4in., four each of 2in. and 2 1/4in., and 2 each of 2 1/2in. and 2 3/4in. sizes. Mechanical interlock construction. Combination. 5/16'' hex/slotted screw head. Marine grade. Non-magnetic. Highly corrosion resistant. Both the band and the screw assembly of these hose clamps are made of 100% 300 series stainless steel. Two clamps per hose end are recommended below the waterline. Hoses are measured by inside diameter, so use a clamp with a maximum opening of at least 1/4'' larger.

Wire hose clamp connects flexible piping to dust hoods, blast gates, and fittings
Wire hose clamps. The Jet 4-Inch Wire Hose Clamp connects flexible piping to dust hoods, blast gates, and fittings. These 4-inch-diameter wire hose clamps come in a pack of two. 10-pack. 4-inch diameter. Hose Clamp, 2.3125" - 3.25"
SS Hose Clamp Kit For Fuel LineS&J Stock # 970170Sh. Wt. 1 lb.
Oil and abrasion resistant tube and cover Dual braided 4-spiral reinforced construction Vinyl guards at both ends 1/4" male x 1/4" male ends Made in the USA 300 PSI working pressure, 1200 burst pressure. Two clamps per hose end are recommended below the waterline. Hoses are measured by inside diameter, so use a clamp with a maximum opening of at least 1/4'' larger.