Established in 1998, China Guanda Hose Technology Co., Ltd. is a professional anchor flange manufacturer and wholesaler of hoses and tubes. Our annually capacity of various kinds of hoses is more than 5,000,000 meters. Our customized anchor flanges products are applied in industrial equipment, hotels, villas, toilets, and kitchens. They are widely used in the field of aerospace, metallurgy, petrol-chemical, machinery, architecture, shipping, vacuum, power and light industries.

Use anchor as personal post or in conjunction with a horizontal lifeline system. 42" Post sits at an angle to allow free movement. Posts may be placed 10 to 60 feet apart. System allows up to 2 workers in each section. This beamguard mounts to any beam or girder with top flange over 4" and up to 3 3/8" thick. Mounting of equipment is accomplished by properly aligning these holes with matching holes in equipment and securing with a 2.75" (69.9mm) long bolt. This carbon steel bolt, a bushing, two washers and a lock nut (U.S. thread) are included with the anchor socket. This unit is individually packaged for single unit sales. The Plastic Anchor Flange Assembly provides a suitable mounting point when surface mounting light duty residential equipment whose outer diameter tubing is 1.9" (48.3mm). The base is symmetrically predrilled to accept four mounting bolts.

This is a machined aluminum anchor flange suitable for use in surface (deck) mounting a variety of equipment including slides, ladders, handrails and stair rails on light to moderate duty residential and light duty commercial installations in most geographic areas. The .3" (7.9mm) thick. machined aluminum Anchor Flange Assembly provides a suitable mounting point when surface mounting light to moderate duty residential and light duty commercial equipment whose outer diameter tubing is 1.9" (48.3mm). The 3.25" (82.6mm) deep mounting tube provides a substantial mounting sleeve while the 5.25" (133.4mm) diameter base provides a stable platform. The base is symmetrically predrilled to accept four mounting bolts of a diameter of 1/4" (.25"/6.4mm) (not included). In addition, either side of the mounting tube is predrilled at approximately 1" (25.4mm) below the top of the mounting tube. Anchoring devices can be installed in many different ways to accomplish partial or complete restraint to axial, vertical, lateral or twisting forces.